New Construction Fittings UF Series Universal Full Body

 The Bravo UF Series universal full body entry fitting is compatible with both singlewalland doublewallmonitored sumps. The UF Series is a termination entry fitting which terminates secondary pipe at the exterior of the containment sump. A separate test reducer is not needed to terminate from primary to secondary pipe. The UF Series has dual integrated test ports that can be used for testing, drainage to a sensor, or VPH constant monitoring. This fitting is universal between size-over-size and coaxial FRP. Can be used for series piping with LCX. Quality FRP construction and bonded installation provides an extremely long service life compared to flexible entry fittings.

New Construction Fittings

New Construction Fittings F Series Full-Body

 The Bravo F Series full body entry fitting is compatible with both singlewalland doublewallmonitored sumps. The F Series is a termination entry fitting which terminates secondary pipe at the exterior of the containment sump. A separate test reducer is not needed to terminate from primary to secondary pipe. The F Series has duel integrated test ports that can be used for testing, drainage to a sensor, or VPH constant monitoring. Models available for both size-over-size and rigid conduit. Quality FRP construction and bonded installation provides an extremely long service life compared to flexible entry fittings.

New Construction Fittings FF Series Flange x Flange

 The Bravo FF Series flange by flange entry fitting for singlewallsumps is our most cost effective bonded FRP entry fitting. The FF is a pass-through entry fitting which brings the secondary pipe into the interior of the containment sump. A separate test reducer is needed to terminate from primary to secondary pipe. Models available for both size-over-size, coaxial FRP and rigid conduit. Quality FRP construction and bonded installation provides an extremely long service life compared to flexible entry fittings.

New Construction Fittings FS Series Half-Body

The Bravo FS Series half-body entry fitting is compatible with both singlewall and doublewall monitored sumps. The FS is a pass-through entry fitting which brings the secondary pipe into the interior of the containment sump. A separate test reducer is needed to terminate from primary to secondary pipe. Models available for both size-over-size, coaxial FRP and rigid conduit. Quality FRP construction and bonded installation provides an extremely long service life compared to flexible entry fittings.

New Construction Fittings Universal Full-Body

The Bravo universal full-body entry fitting is compatible with both singlewall and doublewall monitored sumps. It is a termination entry fitting which terminates secondary pipe at the exterior of the containment sump. A separate test reducer is not needed to terminate from primary to secondary pipe. This fitting has dual integrated test ports that can be used for testing, drainage to a sensor, or VPH constant monitoring. This fitting is universal between size-over-size and coaxial FRP. It can be used for series piping with LCX. Quality FRP construction and bonded installation provide an extremely long service life compared to flexible entry fittings.

New Construction Fittings Full-Body Omega Flex

The Bravo full-body Omega Flex fitting is compatible with both singlewall and doublewall monitored sumps.  Quality FRP construction and bonded installation provides an extremely long service life compared to flexible entry fittings. The full-body Omega Flex fitting can be assembled on the outside of the sump and passed through the sump wall to make the connection saving a lot of time.

UF Series Full Body Universal

 The new full body universal fitting has integrated test ports that can be used for drainage or continuous vacuum monitoring. This fitting can be used on size over size and LCX pipes. The FU-Series full body entry fittings are fully bonded without the need for gaskets, rubber boots or clamps. They are compatible with both singlewalland doublewallmonitored sumps. The FRP push insert design eliminates the need for injection ports, simplifying the assembly process.