Sbravo

Sump Lid RCP Series for Poly Sump

Sump Lids

Sizes

  • 32” diameter cover with flanged options
*See page 2 for dimension drawing and dimension chart

Material

  • Tank-spec fiberglass

Specifications

  • Lid seals simply by stepping on it, then turn the handles to lock position
  • No nuts or removable parts to lose
  • Polyethylene adhesive and epoxy for installation included (dispensing gun sold separately)
  • Anti-water PV valve prevents pressure or vacuum from building
  • Tested to be water-tight under 5’ of water

About the RCP Series for Poly Sumps

Bravo’s RCP series retrofit water-tight sump lids are meant to be installed on any polyethylene tank sump. The RCP Series lid kit permanently attaches a Bravo reducer with an integrated O-ring seal to accept the snap-lock lid. The lid features an integrated pressure/vacuum valve to avoid a build-up of vacuum inside the sump. Step-to-seal design and quarter turn locks provide easy operation. The existing reducer O.D is the only measurement needed to select the correct lid.

Required Tool Kit

Part # Description
T-MG400 Manual dispensing gun for 250 – 400ml dual adhesive cartridges

Replacement O-Ring

Part # Description
OR-SL32 Replacement O-ring for 32″ snap-lock lid reducer

RCP Series Retrofit Water-tight Snap-Lock for FRP Sumps

Part # Description Kits included A B
RCP-DF-SL32 32″ Bravo snap-lock water-tight sump lid kit; includes epoxy and PE adhesive kit EP100RF (X4), PE-250 5.5″ 42″ 23″
RCP-OF-SL32 32″ Bravo snap-lock water-tight sump lid kit; includes epoxy and PE adhesive kit EP100RF (X4), PE-250 5.5″ 42″ 32″
RCP-RF-SL32 32″ Bravo snap-lock water-tight sump lid kit; includes epoxy and PE adhesive kit EP100RF (X4), PE-250 5.5″ 32″ 23″