Sbravo

Retrofit Fitting INR Series

Retrofit Fittings

Sizes

  • 3/4” - 4”

Material

  • Tank-Spec Fiberglass

Specifications

  • No need to break concrete or disconnect pipe
  • Models available for flat or round walls
  • 30-year warranty
  • Installation corrects both interior and exterior wall leaks
  • AB2481 compliant
  • UL2447 Listed

About the INR Series

The INR Series is used for internal, one-sided repairs to eliminate continuous leak points caused by degraded studded flexible entry boots in doublewall sumps. It repairs both interior and exterior leaks without excavation. The split designdoesn’t require disconnecting pipe. Models available for all common FRP piping and rigid conduit. Quality FRP construction provides long term compliance solutions.

INR Series Interior Installation Split FRP Retrofit Entry Fittings for Rigid Pipe Flat Doublewall FRP Sumps;
Universal Replacement (not Kwik-Fit) (No Excavation)

Pipe Type Part # Description EPOXY REQ’D Qty Flange Diameter
3/4″ galvanized conduit RF-07-05-F 3/4″ galvanized, interior installation split for flat doublewall sumps EP100RF (X2) 7″
1″ galvanized conduit RF-07R-05-F 1″ galvanized, interior installation split for flat doublewall sumps EP100RF (X2) 7″
3/4″ Rob Roy conduit RF-10-05-F 3/4″ Rob Roy, interior installation split for flat doublewall sumps EP100RF (X2) 7″
1″ Rob Roy conduit RF-10R-05-F 1″ Rob Roy, interior installation split for flat doublewall sumps EP100RF (X2) 7″
2″ FRP RF-20-05-F “2″ FRP interior installation split for flat doublewall sumps” EP100RF (X3) 9″
3″ FRP RF-30-05-F “3″ FRP interior installation split for flat doublewall sumps” EP100RF (X3) 9″
4″ FRP RF-40-05-F “4″ FRP interior installation split for flat doublewall sumps” EP100RF (X3) 9″

INR Series Interior Installation Split FRP Retrofit Entry Fittings for Rigid Pipe Round Doublewall FRP Sumps; Universal Replacement (not Kwik-Fit)

Pipe Type Part # Description EPOXY REQ’D Qty Flange Diameter
3/4″ galvanized conduit RF-07-05-R 3/4″ galvanized, interior installation split for flat doublewall sumps EP100RF (X2) 7″
1″ galvanized conduit RF-10-05-R 1″ galvanized, interior installation split for flat doublewall sumps EP100RF (X2) 7″
3/4″ Rob Roy conduit RF-07R-05-R 3/4″ Rob Roy, interior installation split for flat doublewall sumps EP100RF (X2) 7″
1″ Rob Roy conduit RF-10R-05-R 1″ Rob Roy, interior installation split for flat doublewall sumps EP100RF (X2) 7″
2″ FRP RF-20-05-R “2″ FRP interior installation split for flat doublewall sumps” EP100RF (X3) 9″
3″ FRP RF-30-05-R “3″ FRP interior installation split for flat doublewall sumps” EP100RF (X3) 9″
4″ FRP RF-40-05-R “4″ FRP interior installation split for flat doublewall sumps” EP100RF (X3) 9″