Sbravo

New Construction Fittings F Series Full-Body

New Construction

Sizes

  • ¾”, 1”
  • 3x2”
  • 4x3” FRP Piping
  • 6x4”

Material

  • Tank-spec fiberglass

Specifications

  • Bonded FRP entry fitting, for long service life
  • Available for singlewall and doublewall sumps
  • No piping test reducers required
  • Duel redundant test ports
  • Models for flat and curved sump walls
  • 30-year corrosion warranty
  • UL2447 Listed

About the F Series Full-Body

The Bravo F Series full body entry fitting is compatible with both singlewall and doublewall monitored sumps. The F Series is a termination entry fitting which terminates secondary pipe at the exterior of the containment sump. A separate test reducer is not needed to terminate from primary to secondary pipe. The F Series has duel integrated test ports that can be used for testing, drainage to a sensor, or VPH constant monitoring. Models available for both size-over- size and rigid conduit. Quality FRP construction and bonded installation provides an extremely long service life compared to flexible entry fittings.

F Series Full-Body, Flat Sump Wall

Pipe type Part # Description
3/4″ galvanized conduit F-07S-0-F 3/4″ galvanized conduit, full-body with duel injection ports, EPOXY REQ’D
3/4″ PVC coated conduit F-07RS-0-F 3/4″ PVC coated condut, full-body with duel injection ports, EPOXY REQ’D
3/4″ galvanized conduit F-07S-0-DF 3/4″ galvanized conduit, doublewall full-body, duel injection ports and tertiary boot seal, Flat wall FRP, EPOXY REQ’D
3/4″ PVC coated conduit F-07RS-0-DF 3/4″ PVC coated conduit, doublewall full-body, duel injection ports and tertiary boot seal, Flat wall FRP, EPOXY REQ’D
1″ galvanized conduit F-10S-0-F 1″ galvanized conduit, full-body with duel injection ports, EPOXY REQ’D
1″ PVC coated conduit F-10RS-0-F 1″ PVC coated conduit, full-body with duel injection ports, EPOXY REQ’D
1″ galvanized conduit F-10S-0-DF 1″ galvanized conduit, doublewall full-body, duel injection ports and tertiary boot seal, Flat wall FRP, EPOXY REQ’D
1″ PVC coated conduit F-10RS-0-DF 1″ PVC coated conduit, doublewall full-body, duel injection ports and tertiary boot seal, Flat wall FRP, EPOXY REQ’D
3/4 brass ground- ing rod F-07-GR 3/4″ brass grounding rod, full-body with brass conductor and clamps, EPOXY REQ’D
3 x 2″ FRP F-32S-T-F 3×2″ FRP, full-body taper by slip; dual test ports and single injection port, EPOXY REQ’D
4 x 3″ FRP F-43S-T-F 4×3″ FRP, full-body taper by slip; dual test ports and single injection port, EPOXY REQ’D
6 x 4″ FRP F-64S-T-F 6×4″ FRP, full-body taper by slip; dual test ports and single injection port, EPOXY REQ’D
3 x 2″ FRP F-32A-T-F 3×2″ FRP, adjustable full-body taper by slip; dual test ports and single injection port, EPOXY REQ’D
4 x 3″ FRP F-43A-T-F 4×3″ FRP, adjustable full-body taper by slip; dual test ports and single injection port, EPOXY REQ’D

F Series Full-Body, Round Sump Wall

Pipe type Part # Description
3/4″ galvanized conduit F-07S-0-R 3/4″ galvanized conduit, full-body with duel injection ports, EPOXY REQ’D
3/4″ PVC coated conduit F-07RS-0-R 3/4″ PVC coated conduit, full-body with duel injection ports, EPOXY REQ’D
3/4″ galvanized conduit F-07S-0-DR 3/4″ galvanized conduit, doublewall full-body, duel injection ports and tertiary boot seal, Round wall FRP, EPOXY REQ’D
3/4″ PVC coated conduit F-07RS-0-DR 3/4″ PVC coated conduit, doublewall full-body, duel injection ports and tertiary boot seal, Round wall FRP, EPOXY REQ’D
1″ galvanized conduit F-10S-0-R 1″ galvanized conduit, full-body with duel injection ports, EPOXY REQ’D
1″ PVC coated conduit F-10RS-0-R 1″ PVC coated conduit, full-body with duel injection ports, EPOXY REQ’D
1″ galvanized conduit F-10S-0-DR 1″ galvanized conduit, doublewall full-body, duel injection ports and tertiary boot seal, Round wall FRP, EPOXY REQ’D
1″ PVC coated conduit F-10RS-0-DR 1″ PVC coated conduit, doublewall full-body, duel injection ports and tertiary boot seal, Round wall FRP, EPOXY REQ’D
3/4 brass ground- ing rod F-07-GR-R 3/4″ brass grounding rod, full-body with brass conductor and clamps, EPOXY REQ’D
3 x 2″ FRP F-32S-T-R 3×2″ FRP, full-body taper by slip; dual test ports and single injection port, EPOXY REQ’D
4 x 3″ FRP F-43S-T-R 4×3″ FRP, full-body taper by slip; dual test ports and single injection port, EPOXY REQ’D
6 x 4″ FRP F-64S-T-R 6×4″ FRP, full-body taper by slip; dual test ports and single injection port, EPOXY REQ’D
3 x 2″ FRP F-32A-T-R 3×2″ FRP, adjustable full-body taper by slip; dual test ports and single injection port, EPOXY REQ’D
4 x 3″ FRP F-43A-T-R 4×3″ FRP, adjustable full-body taper by slip; dual test ports and single injection port, EPOXY REQ’D